Sign in

Restricted access. Use the login you were given.

Email Password

View-only access

You can see everything in the app. Only technicians submit parameters. Ask an admin to change your access if you need to submit.

← Back to Home

New parameter · upload Set & Cut

Select the boxes and upload the photos. Cutting values (speed, pressure, focus) are read from the HypCut screen photos . No manual typing needed.

Identification (select only)

Material

Thickness

Gas

Material grade (as the client specifies: 304, 316L, 6061-T6, Ti Gr.5, Inconel 625)

Focal length

Machine model

Machine power

Nozzle

Controller

Cutting head

This is a BEVEL parameter (bevel cut)

Angle can change per toolpath. The final part photo is single (not per toolpath). B = straight face; A/C = bevel. Default cut order (machine): C → B → A, or B → A for 2 toolpaths; operator can change it.

Parameter photos

Standard shot: hold the phone landscape, part centered and filling the frame. Every photo is auto-cropped to the same 4:3 frame on upload.

Final part photo (single)

Context

Cut date

Machine serial no.

Machine plate photo (optional: snap the serial plate instead of typing)

Operator / author

Notes / regime

Status