Analyze my cut

Take a photo of the cut edge, tell me what you see, and I'll show you where to look and the one thing to adjust first. Grounded in the validated field library.

Photo of the cut Edge, face or exit. Good light, close up. What is this photo? Cut type What's happening? Speak or type

My current settings required: speed, gas pressure, focus and nozzle as they read on your machine screen

Fill from a photo of the screen

Cut speed

mm/smm/minm/minin/sin/min

Gas pressure

barpsiMPa

Focus (DNE screen) type the number as it reads on the DNE screen, not W

mminch

Nozzle Select… Single layer 1.2J Single layer 1.3J Single layer 1.4J Single layer 1.6J Single layer 1.8J Single layer 2.5J Single layer 3.0J Single layer 4.0J Single layer 5.0J Single layer 6.0J Single layer 8.0J Single layer 10.0J Double layer 1.4DJ Other… (type it)

Pierce type Select… FlashSegment IncrementalStepping

Pierce power

%

Pierce gas pressure

barpsiMPa

Pierce focus (DNE screen) type the number as it reads on the DNE screen, not W

mminch

Pierce standoff

mminch

Pierce dwell

ms

Deslag controller feature, if your version has it Select… OnOff My controller does not have it